ECOA TECHNOLOGIES CORP .

Gas Detection Device

Gas Detection Device-ST 800ARMBS

Description

“Single button operate and Mode control” is the design idea of ECOA product which being fully programmable it ensures complete application of simple operating, that for offering versatility temperature controller efficiently to customer requests.The alarm recommended installation place: the location suggested by National Fire Protection Association (NFPA) and Consumer Product Safety Commission (CPSC):

‧The device should be installedin the place with gas combustion equipment or gas storage space, such as: gas water heaters, kitchen stoves and other living space or gas storage space.

The gas alarm suitable installation place:

‧The place which using Natural gas (LNG): It is recommended to be installed in the ceiling within a distance of 30cm from the local gas combustion device 3 meters away.

‧The place which using Natural gas (LPG): It is recommended to be installed in the ceiling within a distance of 30cm from the local gas combustion device 3 meters away.

The gas alarm unsuitable installation place:

‧Distance between 1.5 meters from any combustion equipment or gas heater or above them.

‧The 3m range within the high humidity location such as toilet, shower, and sauna.

‧The place which within temperatures lower than 0 ℃ or higher than 50 ℃ premises or in direct sunlight.

‧High dust, high pollution, dirty or greasy areas

‧Industrial building for special purposes, the factories, warehouses, car, boat or plane, where might not provided adequate protection.

Highlights

‧Easy installation: Cable terminal wiring.

‧Diversity system such as host connection, valve control, bi-directional connection (I/O) and external control. Suitable for Digital E-Home and general connection.

‧Test button: click this button slightly on standby status,, the alarm will issued with the actual state as same alert sound and light signals.

‧Easy detection: Hold down the test button about 8 seconds, the device will output signal to provide the professionals detecting.

‧Electronic power key: this button will turned on automatically when the power connecting, which provides professionals using, normally it setted on the standby status.

‧Embedded high-efficiency switching power supply: international full voltage applicable.

‧Advanced micro-processor and Intelligent control technology: intelligently monitor and diversify control all the time.

‧Inner loop of self-diagnostic function:  malfunction sound and light inform.

‧The gas alarm specifications conform to UL 1484 standards.

 

Back to Menu

---